Leading standard organisations and specifiers recognise the importance of removing moisture laden air from building voids, to prevent damage to the building fabric from condensation. Regardless of underlay used, fibre cement slates require the space between the insulation and...Read More
Leading standard organisations and specifiers recognise the importance of removing moisture laden air from building voids, to prevent damage to the building fabric from condensation.
Regardless of underlay used, fibre cement slates require the space between the insulation and underlay to be ventilated. If LR (low resistance) “breather membranes” are used, the space between the underlay and the underside of the slates (batten space) must be ventilated.
The most effective way to achieve this is by having a continuous airgap at eaves and another at the ridge. This allows any moisture to be flushed out of the whole roof slope.
Dry fixed Cembrit continuous ventilated ridges are one piece, lightweight, secure ridge units that are straightforward and time saving for the roofer to install.
Manufactured from the same raw materials and pigments as fibre cement slates, Cembrit continuous vent ridges are available in the commonest roof pitches. They will match the slate colour and roof pitch with no unsightly protrusions or changes of angle, contributing to the sleek effect that can be achieved with Cembrit fibre cement slate roofs.
Please note 4x Cembrit sela screws required per ridge.
Length : 525mm.
Ridge angle : 135°.
Roof pitch angle : 22.5°.
Weight : 3.24kg.
Air gap per unit : 5880mm2.
Fix twice through the wing on both sides. Fixing holes to be 3mm diameter greater than the diameter of the screw fixing’s shank. Pre drill 4 fixing holes in the locations shown on the photo above, recommended fixing 6.3mm x 90mm self-tapping Sela type screw. The open end of the ridge overlays the socket on the previous unit. It is advisable to seal the joint with a bead of mastic in the groove on the socket, particularly in exposed locations.
Question:
Hi Please can you tell me if you do the ridge in black / blue to match the Westerland tile. Thanks.
Answer:
These riidges are only available in Graphite Grey I am afraid, there are some Ridges in Blue/Black available from Etex you can find on the link below.
https://www.roofingsuperstore.co.uk/browse/pitched-roofing/ridge-hip-tiles/fibre-cement-ridge/marley-eternit-fibre-cement-ridge.html
Pay in 4 interest-free payments of £3.1825
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
