Path & patio seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of sunlight, water, oil, petrol and fungal/moss growth. The milky solution dries to a clear hard-wearing, water repel...Read More
Path & patio seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of sunlight, water, oil, petrol and fungal/moss growth. The milky solution dries to a clear hard-wearing, water repellent film giving a low sheen slip resistant finish.
Application
Stir well before use. May be applied to damp but not wet surfaces. Apply using a long pile roller and tray or low-pressure spray. Ensure even and thorough coverage, especially on textured finishes where ponding of the material must be avoided. Apply in two coats, allowing 2 hours between coats. An extra coat may be applied if a semi gloss finish is required. Drying time will be 4 hours from the last coat at 20°C. This will be extended at lower temperatures. Do not apply below 5°C.
Areas treated with this product can be cleaned with warm water and detergent or everbuild moss away. Do not use acid based cleaners, as these will remove/discolour the product. Avoid using power washes.
Storage
Store at moderate temperatures in original containers and protect from frost.
Shelf life
12 months when stored according to manufacturers instructions.
There are no product specifications to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £19.155
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
