Order Helpline 01752 692 760
Order Helpline 01752 692 760

Fakro SRT+ 35cm x 200cm Length Rigid Light Transmitting Tube - Slate

Code:
SRT Plus 35/200 SLS
Brand:

SRT+ sun tunnels have a lightbulb. In order to supply interior with natural light where there are no opportunities to install roof or vertical windows, an effective solution can be a Light Tunnel. Thanks to the light tunnel, the natural light gets into the building ill...Read More

Create a wishlist

"Ordered 2 velux windows- delivered…"

Mrs Sheila Wilson

Description

SRT+ sun tunnels have a lightbulb.

In order to supply interior with natural light where there are no opportunities to install roof or vertical windows, an effective solution can be a Light Tunnel.
Thanks to the light tunnel, the natural light gets into the building illuminating its interior.
Dimly lit interiors without access to the natural light can become light and comfortable to use.

Features
35cm Diameter Pipe.
Length: 2m.
Installation pitches 15 - 60 degrees.

Domes
The dome is made of polymethacrylate, a material resistant to mechanical damage.
The dome’s shape and height is a combination of self-cleaning effect and co-efficient of overall sun light transmittance to building interior.
The low electrostatic activity of the dome’s surface means that the dust adheres to dome’s surface only lightly, so the rain quickly washes the dirt away.
The dome’s shape also assists in the quick removal of snow.

Flashings
Flashing is used for a correct light tunnel installation into the roof slope.
Flashing ring is equipped with drips openings which can drain away the eventual condensate outside the light tunnel.
In the middle of the flashing there is a reflective ring, the first element of which reflects the light entering into the light tunnel via a dome.

Rigid light transmitting tube
Light transmitting tube is made of aluminium, covered with a highly reflective silver based layer, characterised by a high efficiency light reflective factor, over 98% (compared to a new mirror reflective factor of 90-95%).
The minimal light transmittance losses enable SRT light tunnels with a tube length of up to 12m to be applied.
While installing the light transmitting tube, there is no need to cut it, because its design is telescopic.
In order to attain proper tube length, it is possible to push one element deeper inside the other.
In case the tube is longer than 4m, the use of SRC hangers is advised.

Elbow
The SRK elbow changes the angle of the light transmitting tube anywhere between 0 – 65º.

Ceiling frame with diffuser
White ceiling frame and diffuser are the only elements visible in the ceiling after the light tunnel is installed.
The sun’s rays reflected from the walls of light transmitting tube are directed downwards the light diffuser.
The main diffuser’s role is to spread the light evenly throughout the room.
The light diffuser consists of the transparent and mat diffusers equipped with UV filters.
Both (transparent and mat) diffusers are placed inside the seal, which unites them into one entity.
Between the diffusers, there is an air chamber, which plays the role of insulation between the room interior and light transmitting tube.
It minimises the level of condensation inside the light transmitting tube.

There are no product specifications to show.

Questions & Answers

There are currently no questions for this product.

loading...

Product Enquiry Form

Fakro SRT+ 35cm x 200cm Length Rigid Light Transmitting Tube - Slate

*Required Field