Kronospan OSB is manufactured to strict quality standards to guarantee a board of consistent characteristics and low environmental impact. Unlike plywood, Kronospan OSB is free from knot replacement sections, cracks and potential weaknesses in the inner layer. Properties 8f...Read More
Kronospan OSB is manufactured to strict quality standards to guarantee a board of consistent characteristics and low environmental impact. Unlike plywood, Kronospan OSB is free from knot replacement sections, cracks and potential weaknesses in the inner layer.
Properties
8ft x 4ft
Length : 2.44m.
Width : 1.22m.
Thickness : 11mm.
Material : OSB.
Installation
When Kronospan OSB forms part of an external or internal timber framed wall, allow a minimum 3mm expansion gap between boards. Where boards abut a rigid upstand this gap should be 10-15mm. Long walls may require more gaps, given a possible overall expansion range of 2mm per metre lengthways. This is in addition to the 3mm expansion gap already described.
Coating & laquering
Kronospan OSB in exterior applications should be treated thoroughly on faces and edges with an appropriate coating, as recommended by a reputable paint producer. Avoid using OSB in areas exposed directly to the weather. OSB in interiors can be coated with virtually any lacquer, oil or wax. Water-based finishes are not recommended, as they can cause strand swelling.
Storage
Lay panels flat on same thickness support blocks arranged a maximum of 600mm apart, or on pallets. Protect edges from water penetration. Store off the ground in enclosed, dry areas or under adequate waterproof but moisture-permeable sheet.
This product is 100% PEFC certified.
There are no product specifications to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £0
Learn more