RynoPave RPA1 Self-Levelling Adjustable Paving Pedestal 110mm - 160mm RynoPave self-levelling paving pedestals have been designed for compatibility with all calibrated paving to allow for a flat and well-supported paving install. Height corrections between 40mm – 56mm c...Read More
RynoPave RPA1 Self-Levelling Adjustable Paving Pedestal 110mm - 160mm
RynoPave self-levelling paving pedestals have been designed for compatibility with all calibrated paving to allow for a flat and well-supported paving install. Height corrections between 40mm – 56mm can be achieved with RynoPave paving pedestals thanks to an adjustable threaded section that allows millimeter adjustment.
Beneath the adjustable threaded section sits a height extension collar which allows installers to build up the initial pedestal height in 100mm increments, for faster build-up of tall heights. Attaching with a single click, this is secured onto the supporting base which has wide design to protect any membranes below and spread the load of the paving more evenly. Water drainage holes in the base have the dual use of draining water away and allowing the base to be fixed to a surface.
A slope correction of up to 10.5%, the equivalent of 6 degrees, self-levels to the angle required so no levelling shims are required. Thanks to the threaded section and the self-levelling paving support head, there’s no need for any shims when using RynoPave adjustable paving pedestals. This means you won’t have jobs or installs slowed down by a lack of shims.
On top of the self-levelling paving support head spacer tabs sit to provide consistent spacing between paving slabs for an accurate and aesthetically pleasing finish to the system. Manufactured from mould-resistant, algae-resistant, alkali-resistant, and bitumen-resistant recyclable polypropylene, RynoPave pedestals can support up to 2100kg compression so there’s no need to worry about the strong polypropylene.
Height Range: 110mm - 160mm
Question:
Hello I'm using this system to support 800x800x20mm porcelain tiles, do I need one in the middle of each tile as well as one in each corner? Thanks Vinny
Answer:
Hi Vinny
20mm is too thin to walk on I would be looking at a 30mm + tile
Pay in 4 interest-free payments of £1.45
Learn more