When using the Decra Barge cover fix the barge boards in a position where they are 25mm higher than the tops of the tile battens. Underlay should turn up against the edge of bargeboard by 25mm. Installing the Decra barge cover at gables Start off at the eave by nailing a ...Read More
When using the Decra Barge cover fix the barge boards in a position where they are 25mm higher than the tops of the tile battens.
Underlay should turn up against the edge of bargeboard by 25mm.
Installing the Decra barge cover at gables
Start off at the eave by nailing a Decra Barge Cover Eave Closure into position.
Fold lower half of front edge of barge cover back up and behind front lip of eaves tile.
Nail remaining bargecovers into position using 3 nails vertically and 3 horizontally as before. Care should be taken to ensure bargecovers are correctly lapped.
After completion of roof cover the bargecover nail heads with Decra finishing kit.
Slightly quicker to install and more cost effective than the cloaked verge cap.
For use at gables, verges and barges.
Cover - 1110mm.
There are no product specifications to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £3.4875
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
