Marley fibre cement Traditional Vertigo slates are lightweight, weather and temperature resistant and create beautiful, distinctive and elegant vertical cladding solutions for a full range of building types. Unique to Marley, the Vertigo range has been specifically created fo...Read More
Marley fibre cement Traditional Vertigo slates are lightweight, weather and temperature resistant and create beautiful, distinctive and elegant vertical cladding solutions for a full range of building types.
Unique to Marley, the Vertigo range has been specifically created for vertical applications, perfectly adapting to the contours of the building and providing a second protective skin, which enables visual and performance continuity between roof and facade, creating a complete and beautiful building envelope.
Our Vertigo range gives free rein to your creativity and brings a new dimension to design with fibre cement slates.
Please note Vertigo slates are a minimum order quantity of 2 pallets.
Vertigo slates are suitable for the following structures:
Where fibre cement slates are used on a walling application, the backing structure must be the water/wind proof construction.
Our slates are usually delivered on a Six Wheeled Lorry (11m Long & 2.4m Wide) with a Tail-Lift facility to off-load on solid level ground with a Pump Truck.
Non compliance to delivery restrictions may result in additional Delivery Charges.
Should you specifically require Crane Off-Load or small vehicle please notify us at the time of ordering, as an additional charge may be incurred.
Please note, the Vertigo range, when used in a wall application is suitable for use with up to a maximum 2.0 kN/m² windload. Loadings in excess of this are not recommended.
Please also note Vertigo slates are not recommended for use on the roof. To create a complete building envelope, matching slates from the Birkdale and Rivendale range should be used.
Length: 600mm.
Width: 300mm.
Nominal thickness: 4mm.
Density: Slates have a minimum apparent density of 1700kg/m3 when tested to BS EN 492.
Bending strength longitudinal: Meet the strength requirements of BS EN 492, achieving an average bending moment greater than 50Nm/m (Class B).
Frost Resistance: Unaffected by frost and meet the requirements of BS EN 492.
Reaction to fire: Class A2 -s1, d0.
Thermal conductivity: 0.011m²K/W.
Nail Holes: Non-Holed
There are currently no questions for this product.
Pay in 4 interest-free payments of £736.724975
Learn more