A light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, ages asphalt and primed steel. It is a superior alternative to chippings when applied in a two coat application. Reduces heat ...Read More
A light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, ages asphalt and primed steel. It is a superior alternative to chippings when applied in a two coat application. Reduces heat build-up and gives a reflective finish to bituminous coatings and primed steel. Suitable for the refurbishment of aged steel roofs.
Stir very thoroughly before use. Do not thin. Apply immediately and continue stirring periodically during use. Apply by brush or mohair roller When brushing, use soft bristle brushes applying the lightest of pressure.
Over recently applied bituminous surfaces allow the following minimum periods to elapse after the final coat has dried before applying aluminium solar reflective paint :
hot applied coatings - 24 hours
solvent based coatings - 3 days
water based coatings - 14 days
Apply 2 coats, the second coat being applied as soon as the firsrt coat is dry.
Approximately 1 hour depending on temperature, humidity, air and base conditions.
Shelf life of this product is a minimum of 5 years under good storage conditions in original unopened containers.
There are no product specifications to show.
Question:
Is there any guarantee or life span on this product?
Answer:
There is not a guarantee but if installed correctly you can expect it to last up to 5-10 years.
Pay in 4 interest-free payments of £23.215
Learn more