Everbuild Exact Gap Foam - 750ml Once used exact gap foam can be cut, sawn or plastered over after only 2 hours. Description Exact gap foam has been formulated to provide a more precise foam product that only expands between 5 and 10% from the bead extruded on application. ...Read More
Everbuild Exact Gap Foam - 750ml
Once used exact gap foam can be cut, sawn or plastered over after only 2 hours.
Description
Exact gap foam has been formulated to provide a more precise foam product that only expands between 5 and 10% from the bead extruded on application. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterwards, the waste disposal of which can be difficult on some sites, and reduces the danger of wet foam falling onto the floor and surrounding substrates, and the damage and staining this can cause. It is also the ideal product to use where it is important not to impact too much stress onto the item being installed.
Application
Carefully read instructions before use and wear protective equipment. Ensure all surfaces are clean, sound and free from dust and loose particles. Moisten surfaces to be filled/sealed with water. This assists the curing process. Shake can well before use about 20 times. Fix nozzle applicatior. Always use with can upside down. Fill the cavity just less than full as the foam will expand slightly to fill the remaining space. Any excess foam can be removed whilst still wet with everbuild dual purpose foam cleaner. Nozzle and valve tip must also be cleaned with this product. Once cured, foam must be removed with a knife, scraper or everbuild foam eater.
Please note when transported in cars, keep in the boot and out of direct sunlight. When removing cured foam from skin, take care not to damage with abrasives. Grease skin with body lotion or similar.
Important : Re-use is only possible by cleaning the nozzle and valve tip with everbuild dual purpose foam cleaner before the foam has cured. Do not push any object into the valve as the contents may explode.
Storage
Store upright between 20 and 25°C pressurised container. Protect for sunlight and do not expose to temperatures above 50°C. Do not pierce or burn the can even after use and store as flammable liquid.
Shelf life
24 months in original containers at stated storage temperatures, elevated temperatures will reduce the shelf life dramatically.
There are no product specifications to show.
There are currently no questions for this product.
Pay in 4 interest-free payments of £1.8275
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
