Made with polyester paint, this 34/1000 box profile roofing sheet is primed and coated with 25 microns of high-grade, highly durable enamel paint in stunning juniper green. This paint allows for a lifespan of 20 years when installed in normal environments. Suited to a minimum p... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Made with polyester paint, this 34/1000 box profile roofing sheet is primed and coated with 25 microns of high-grade, highly durable enamel paint in stunning juniper green. This paint allows for a lifespan of 20 years when installed in normal environments.
Suited to a minimum pitch of 4°, this sheet can be used with existing cladding or in built-up insulated systems on both vertical and horizontal walls and roofs. It has been tested to CE EN 14782 requirements and is fantastically long-lasting.
Perfect for a large variety of vertical and horizontal walls and roofing applications, including agricultural, commercial, domestic, and industrial, this 0.7mm roof sheet is thick and commendably lightweight. Offering a robust solution, this sheet features seven rigid profiles, each with a pitch of 166mm and a lower 34mm profile height.
This product comes with an assortment of lengths for you to choose from, meaning you can find the right roof sheet for your needs.
Please note:
This item is non-returnable due to being Special Order, Made to Measure or for hygiene reasons. Your statutory rights are not affected.
There are no product downloads to show.
Question:
Could you please advise Which self adhesive drip stop is recommended with these sheets. Thanks
Answer:
While I do not have information on a specific self-adhesive drip stop that is recommended for the Metal Roof Sheet (34/1000 Box Profile) Polyester Paint Coated 0.7mm Juniper Green, I can tell you that most self-adhesive drip stop products should be compatible with this type of metal roofing sheet. However, it's always a good idea to double-check the compatibility of any product with the specific material and finish of your roofing sheets. For more detailed information, I'd recommend reaching out to the product manufacturer, Hornsey, or consulting with a roofing professional to ensure the best fit for your project. You can find more product details on the product page.
Question:
What length hex screws would you recommend for 34mm depth roofing sheets?
Answer:
Either TF32's or TF45's please see links below:
https://www.roofingsuperstore.co.uk/product/cladco-32mm-screw-to-wood-19mm-bonded-washer-pack-of-100.html
https://www.roofingsuperstore.co.uk/product/cladco-45mm-screw-to-wood-19mm-bonded-washer-pack-of-100.html
Question:
How wide are they?
Answer:
These sheets are 1000mm wide. The second image on the listing shows the profile and their coverage.
Question:
What width are these sheets and what overlap is recommended please?
Answer:
total width 1083mm cover width 1000mm
Question:
How much do they weight
Answer:
It would depend on the length - as a guide line, the 4lm would be approx 23.6kg
Question:
What ridge cap would you recommend? I’m Concerned about driving winds and rain pushing water up the corrugations underneath the flat profiled ridge caps .
Answer:
If the cladco ridge is fixed correctly you should have no issues.
https://www.roofingsuperstore.co.uk/product/cladco-metal-pvc-plastiol-coated-juniper-green-ridge-flashing-200mm-x-200mm-x-3000mm.html
Question:
how many fixing bolts/screws do I need per 3000mm length panel
Answer:
depending on the site, but as a rule of thumb, 4/5 fixing every meter - so in your case 15 fixing
Question:
Hi is this product sold in 1mtr wide strips
Answer:
Yes thats correct
Question:
Will these sheets rust ?
Answer:
They shouldn't rust no due to the polyester coating
Question:
What are the best fixings for timber?
Answer:
Have a look at this link
https://www.roofingsuperstore.co.uk/product/cladco-45mm-screw-to-wood-19mm-bonded-washer-pack-of-100.html
Question:
Wot kind of fixings
Answer:
It depends on what you are fixing too. Have a look at this link
https://www.roofingsuperstore.co.uk/product/cladco-45mm-screw-to-wood-19mm-bonded-washer-pack-of-100.html
Question:
What's the width of these sheets please? I can't see that info' here.
Answer:
These cover 1000mm on the width once overlapped.
Question:
Hi, how much would it be for a 34/1000 sheet cut in half down it's length please? Thanks.
Answer:
If you email us at sales@roofingsuperstore.co.uk with the specific lengths you need we can put together a price cut to size for you.
Question:
can you get translucent sheets to match?
Answer:
Yes these are available as a special order from the suppliers, if you email your enquiry to sales@roofingsuperstore.co.uk with the sizes needed we can get a price for you.
Question:
WHAT IS THE LENGTH OF EACH SHEET?
Answer:
You select the sheet length from the drop down menu above. The standard sheet width is 1000mm.
Question:
What is the width of the sheets ?
Answer:
These sheets cover 1000mm on the width.
Question:
Hi, what is the coverage allowing for a suitable overlap please?
Answer:
Each sheet covers 1000mm width after overlap.
Question:
What is the width of the sheet?
Answer:
The cover width is 1 metre.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
