Offering an exceptional roofing solution, this Cladco Profile 34/1000 metal sheet comes in a sleek Slate-Blue finish. Primed and coated with 25 microns of durable enamel paint, it has an expected lifespan of over twenty years in regular environments. Designed to be flexible and...Read More
Offering an exceptional roofing solution, this Cladco Profile 34/1000 metal sheet comes in a sleek Slate-Blue finish. Primed and coated with 25 microns of durable enamel paint, it has an expected lifespan of over twenty years in regular environments.
Designed to be flexible and lightweight, this single-skin sheeting boasts seven rigid profiles with a height of 24mm and a pitch of 166mm across its width. Manufactured using coated steel strip, this economically efficient and sturdy roof sheet is 0.7mm thick and perfectly tailored for various applications. Whether it's for horizontal or vertical walls and roofs in industrial, commercial, agricultural or domestic settings, it provides excellent results.
With the ability to be installed on pitches as low as four degrees and featuring a fully weatherproof lap with an impressive actual width coverage of 1000mm, this Cladco roof sheet delivers both practicality and reliability. You can rest assured it has been independently tested to meet the latest CE EN 14782 requirements. A comprehensive range of matching flashing, trims and rooflights has been developed to provide you with a complete roofing solution.
Please note:
There are no product downloads to show.
Question:
Can this product be used as a vertical wall covering on a timber frame building.
Answer:
Technically Yes
Question:
I am looking for a data sheet for this product please
Answer:
https://www.cladco.co.uk/media/pdf/DataSheet_BoxProfile34:1000Polyester.pdf
Question:
What spacing for joists is needed across the sheets?
Answer:
Have a look at this link
https://www.roofingsuperstore.co.uk/user-guides-brochures/cladco-installation-guide-final.html
Question:
Hi What is the best way to cut length and width? Many Thanks J Thorpe
Answer:
I metal blade saw of an angle grider
Question:
What is the maximum support spacing
Answer:
The sheets are one meter wide
Question:
Cladco sheet What fixings do you recommend securing to timber. Quantity required for 18 X 3.6m sheets Please
Answer:
Good Morning Barry
Depending on your joist beams really but you need to be looking at this product https://www.roofingsuperstore.co.uk/product/cladco-45mm-screw-to-wood-19mm-bonded-washer-pack-of-100.html
Question:
How heavy is one sheet 2300 long
Answer:
Hi John
a 2.3m would be 15.36kg - if you need a quote just email the team at sale@roofingsuperstore.co.uk
Question:
What size fixings you recommend for these sheets also, have bought the finishing trims for the 2 sides but what do you recommend for the bottom to finish of roof where it will run into gutters to stop wasps etc geting in through the profile into the roof structure
Answer:
The below linked foam fillers can be used to close of the opening at the eaves.
https://www.roofingsuperstore.co.uk/product/cladco-34-1000-supaseal-25mm-profiled-pair-of-foam-fillers.html
For fixings you can use the nails below if going into timber.
https://www.roofingsuperstore.co.uk/product/cladco-45mm-screw-to-wood-19mm-bonded-washer-pack-of-100.html
Question:
what is thickness for hook bolts
Answer:
The sheets are 0.7mm thick and you would fix through the trough part of the profile.
Question:
width
Answer:
The cover wdith of these sheets is 1000mm each once overlapped.
Question:
What is the width of this sheet please?
Answer:
1000mm cover width
Pay in 4 interest-free payments of £5.325
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
