Everbuild Silicon Sealant 700T - Brown (C3)

Product Code:
700TBN
Brand:
Est. Delivery: 1-2 Working Days
Shipping costs displayed in basket.
We can let you know when this product is back in stock.

This product is proving to be very popular and has unfortunately sold out.

Enter your email below and we'll notify you as soon as this product is back in stock:

Subject to stock availability, if products on a 24 hours service are ordered alongside products NOT on a 24 hours service, this may delay your whole order.

View Transport Policy

All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlandsand Islands, a member of our helpline team will contact you prior to processing your order should an additional delivery charge apply.

While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

£2.84 Incl. VAT
£2.37 Ex. VAT
Oops! Please select from the options

Product Description

 

Product Description
EVERFLEX SILICONE 700 is a cost effective low modulus, Neutral, oxime cure RTV silicone sealant that adheres to a wide range of both porous and non porous surfaces without the need for priming. SILICONE 700T is formulated to resist mould and bacterial attack and as a high viscosity grade to give excellent tooling properties.


Benefits
•    Excellent adhesion - adheres to most common surfaces including glass, metals, plastics and wood
•    Low dirt pick up - important in PVCu  work
•    Excellent external weathering properties.
•    Suitable for use on polycarbonate.
•    Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the Construction Product Regulation


Areas For Use
•    Perimeter pointing internally and externally around PVCu /wood and all other window frames.
•    Sealing and as an adhesive onto PVCu, plastic trims and components.
•    Suitable as an expansion joint sealant.
•    Weather sealing and joint sealing to pre-formed panels.
•    Sealing soft metals such as lead, copper and zinc.
•    General draughtproofing, including repair work over existing sealant.
•    Parapet and roof weather sealing applications.


Limitations
•    Do not use in conjunction with bitumen asphalt, neoprene and certain organic elastomers.
•    Do not use in the manufacture of Aquariums. Use AQUA MATE
•    Do not use on substrates that bleed oil, solvents or plasticisers.
•    Non overpaintable. Use WEATHER MATE
•    Not suitable for bedding  I. G Units – Use Silicone 450
       

Surface Preparation
The surfaces to be must be clean, dry and free from dust, grease and other contaminants. As quality of plastics can vary, always cary out adhesion tests prior to large scale use.
Improve adhesion by wiping surface with EVERFLEX PVC SOLVENT CLEANER (pvc) or white spirits (painted surfaces). Priming is generally not required, although we always advise testing small areas prior to use. Prime with Everbuild Silicone Primer P1 for porous and NP2 for non-porous substrates if priming is to be conducted.

Joint design should be as follows:
Minimum width: 5mm. Movement capacity will be impaired if the depth of the joint is greater than the width. For maximum movement accommodation, it is recommended that:
1.    The  joint depth should be no less than 5mm
2.    Joint depth should be 5mm for joints up to 10mm wide
3.    Joints above 10mm in width should be half the width in depth up to 20mm and  minimum 10mm for wider joints

For deep joints, reduce depth by using  EVERFLEX  FIX AND FILL FOAM or a suitable joint backer rod.
All joints should be designed so that the seal is placed in a position which does not retain water or form a water trap.  Triangular fillets should be no less than 12mm across the face and should be finished with a flat or convex face. 


Application
Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45o with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed. To ensure a proper bond, always smooth the sealant down with a spatula or piece of wood  An improved joint appearance can be achieved by placing masking tape to both sides of the joint, removing within 5 minutes of application.

Coverage
10 linear meters @ 9 x 9mm fillet joint

Storage
Store in original unopened containers between 15 and 30oC


Shelf Life
18 months from date of manufacture
 

Product Documents

Frequently Bought Together

loading...

Questions & Answers

There are currently no questions for this product.

Product Enquiry Form

Everbuild Silicon Sealant 700T - Brown (C3)

*Required Field

Would you like to empty your basket?

Yes No

Sorry

It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.

If you wish to access our site please either upgrade your browser or download an alternative.