Harcon Corovent Ridgeline Vent with Extension Sleeve and Pipe Adaptor TV3SN - incorporates an extensive sleeve and a pipe terminal that can provide either 110mm or 125mm connections. Designed to replace a normal ridge tile they are available to match all popular ridge ti... Read More
Harcon Corovent Ridgeline Vent with Extension Sleeve and Pipe Adaptor
TV3SN - incorporates an extensive sleeve and a pipe terminal that can provide either 110mm or 125mm connections.
Designed to replace a normal ridge tile they are available to match all popular ridge tiles and can also be made to match obsolete tiles making them virtually indistinguishable from original tiles.
PLEASE SPECIFY THE MANUFACTURER, ANGLE, COLOUR & IF 110mm OR 125mm CONNECTION NEEDED
Ridgeline roof vents are supported by all the colour and texture matching services available for other Harcon ventilation products.
FEATURES
Ventilation Area: 12500mm2 for ridge vents over 300mm long, shorter ridge vents will have a lower ventilation area
Airflow Resistance: With 125mm outlet 4.0 Pascals at 30 litres per sec With 110mm outlet 9.9 Pascals at 30 litres per sec
Water Resistance: Exceeds all relevant parts of DoE - Partners in Technology Programme
INSTALLATION
1 - Hold ridge vent in position and mark the underfelt directly below the ridge vent outlet. Cut and remove the underlay as marked.
2 - Bed ridge vents in mortar in a similar manner to the standard ridges. Nail the retaining straps to rafters/ridge board.
3 - Complete ridge in normal manner.
If using pipe adaptor, clip to felt sleeve and attach CT1C flexitube, after fitting into roof.
There are no product specifications to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
