Delivering 5,000mm²/m ventilation to your roof void through the vent roll, equating to a continuous 5mm gap, this Manthorpe Roll-Out Dry Vent Ridge System is quick, easy and clean to install. It can be fitted during frosts and other adverse weather conditions without mortar. As...Read More
Delivering 5,000mm²/m ventilation to your roof void through the vent roll, equating to a continuous 5mm gap, this Manthorpe Roll-Out Dry Vent Ridge System is quick, easy and clean to install. It can be fitted during frosts and other adverse weather conditions without mortar.
As a mechanically fitted system, this roll-out dry vent ridge from Manthorpe securely fixes the ridge tiles onto a roof while protecting them from rain penetration and wind up-lift. Compatible with most makes of concrete angled and round ridge tiles and most profiled, flat concrete and slate tiles, it can be fixed to the ridge of any duo roof with a pitch from 15° up to 45°. Independently wind-tunnel-tested by BRE, its testing complies with the requirements of BS 6399-2: 1997 Code of Practice for wind loads.
Providing all the components needed for a ridge run of approximately 6 metres in length (excluding the ridge tiles), this single box of Manthorpe dry ridge comes in a Brown finish and can be used in conjunction with both Manthorpe Linear and Standard Smart Verge systems as well as the ridge end caps.
There are currently no questions for this product.
Pay in 4 interest-free payments of £14.6975
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
