Specially designed for use with Eurodec Coping Stones, this Eurodec 2 Part PU Adhesive is conveniently packed in a 6.5kg bucket and covers an impressive 3m², making it a cost-effective choice for larger surface areas. It can tackle uneven substrates with ease, addressing any i... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreSpecially designed for use with Eurodec Coping Stones, this Eurodec 2 Part PU Adhesive is conveniently packed in a 6.5kg bucket and covers an impressive 3m², making it a cost-effective choice for larger surface areas. It can tackle uneven substrates with ease, addressing any irregularities greater than 3mm.
Simply apply this adhesive in a screed form using a notched trowel to create a smooth and stable surface. Once in place, your tiles can be effortlessly bedded into the adhesive, ensuring a firm and reliable bond.
Please note:
Question:
Hi I am putting coping stones on a wall with a dpc course underneath the coping stone will this sticky to the dpc cheers mark
Answer:
Hi Mark, The Eurodec 2 Part Coping Stone Adhesive is a highly effective bonding agent, but its adherence to a DPC (Damp Proof Course) may vary depending on the material of the DPC. Generally, it's designed to stick to a variety of surfaces, providing they are clean, dry, and free from any loose material. However, without specific details about your DPC, it's hard to give a definitive answer. I would recommend checking with the manufacturer of your DPC material to be sure. For more information about how to use the adhesive, you can refer to the Eurodec fitting instructions found here: Fitting Instructions. Hope this helps, and let us know if you have any other queries!
Question:
Hello, We will require a coping stone to be bedded on to a CP board roof terrace upstand, will this product be suitable to form a bond from the stone to the face of the CP board?
Answer:
The Eurodec 2 Part Coping Stone Adhesive is designed to create a strong bond between coping stones and various substrates. However, the suitability of this adhesive with your specific type of CP board is not explicitly mentioned in the product specifications. I recommend checking with the manufacturer of your CP board to ensure compatibility with this type of adhesive. For further information about the product and its application, you may refer to the Eurodec Fitting Instructions and Technical Information. Please also remember that acid-based cleaners must not be used on Eurodec Concrete Coping Stones and high-pressure washers should be avoided, as the jet can damage the surface of the stone and weaken the bond between the stone and substrate.
Question:
Assuming this is a cement mix, with some sort of epoxy additive? Should you mix by hand or paddle mixer? What's the pot life and curing time? What size notched trowel?
Answer:
The Eurodec 2 Part Coping Stone Adhesive is a two-part polyurethane adhesive, not a cement mix. It's designed to be applied in a screed form with a notched trowel. While it doesn't specify the exact method of mixing, it's generally recommended that two-part adhesives be mixed thoroughly until they're well combined, which could be done by hand or with a paddle mixer depending on your preference. Unfortunately, the product specifications do not provide details on the pot life, curing time, or the specific size of the notched trowel needed. For further clarification on these points, I would advise checking the technical information and fitting instructions provided in the links below: - Technical Information - Fitting Instructions If this information does not provide the needed details, it may be best to contact the manufacturer directly or our customer service team for additional support.
Question:
Does this product stick to fibreglass
Answer:
I have checked with the supplier and yes it does
Products We Recommend
Product Enquiry Form