ClassicBond EPDM is the original EPDM roofing system with a proven track record of over 50 years service life. Recognised as one of the most reliable, durable and sustainable materials for your flat roof.
The ClassicBond roof system is designed to be cost effective and much quicker to install, compared to traditional roofing systems. For most applications the membrane is cut to the size of your roof and supplied as one single piece, trimmed to size and finished off with the correct drip, kerb edge and wall up-stand trims.
The rubber roof EPDM membrane is sold by the running metre cut from large sheets starting at 0.5m in width and increasing in 0.5m increments up to 30.5 metres in length, by 15.25 metres in width. This means no joins are required as long as the roof does not exceed these measurements and makes the ClassicBond EPDM the best for quick and easy installation.
Please remember to allow for up to 200mm rubber membrane each side of the roof for overhang and up walls etc. Under tiles and other features may require more rubber membrane.
ClassicBond EPDM is available in two thicknesses: 1.2mm (standard) and 1.52mm (commercial)
Why Choose ClassicBond® EPDM?
The ClassicBond roof system is designed to be cost effective and far easier to install than traditional DIY flat roof systems, saving you both time and money. For most applications the membrane is cut to the size of your roof and supplied as a single piece, finished with the correct drip, kerb edge and wall up-stand trims.
BBA Certified and preferred by roofing professionals, ClassicBond is tangibly more pliable, slate grey in colour and is an EPDM rubber roof covering for both large and small flat roofs.
With maintenance free properties the EPDM membrane is strong yet lightweight and is not affected by extreme temperatures. Within the temperature range of -40ºC to +120ºC the membrane will not crack, peel or split.
Features & Benefits
Certification: BBA certified
Colour: Slate Grey
Question:
How do you stick it down? Can it go over existing felt roof?
Answer:
EPDM is usually adhered to the roof using the water based adhesive however, if you are looking to put this over an existing felt roof, you will need to use the contact bonding adhesive for this.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.