The ProGRP system is cold applied on site, which gives it a seamless and flexible weatherproof finish that resists water, heat and frost. The resulting surface gives a strong architectural finish that looks very impressive.
If the ProGRP system is properly maintained it can last as long as the building stands.
ProGRP has been developed this technology further to produce the perfect all weather protection for any flat roof. It can be applied in small domestic situations right through to large industrial environments.
The ProGRP Resin correct ratio of resin to glass fibre chop strand mat (450gsm) is 1.5 litres of resin per m2 of mat. For 600gsm mat your resin usage will be approximately 33% higher - the thicker the mat the more resin usage.
ProGRP Topcoat (colour coat) is supplied in 10kg and 20kg cans giving you flexibility and reducing wastage. All cans must be thoroughly shaken/stirred before use and if separate cans are being used mixed together to avoid any possibility of colour variations between batches.
Colour: Anthracite Grey
There are no product downloads to show.
Question:
Can this product be used on existing roof felt? Is there a spec sheet giving application instructions? Thanks
Answer:
GRP needs to be laid straight onto boards you would not be able to apply to roof felt I am afraid. You can find the installation guide on the link below.
https://www.cromarbuildingproducts.com/products/grp-installation-guide/
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.