A durable flashing solution for pipes through slate and tile roofs, Dektite Seldek Aluminium won't corrode or stain your roof and gutters. The EPDM (Ethylene Propylene Diene Terpolymer) cone is a highly durable synthetic rubber roofing membrane that is trimmed to fit on-site a...Read More
A durable flashing solution for pipes through slate and tile roofs, Dektite Seldek Aluminium won't corrode or stain your roof and gutters. The EPDM (Ethylene Propylene Diene Terpolymer) cone is a highly durable synthetic rubber roofing membrane that is trimmed to fit on-site and ingeniously locked to a high-grade and malleable 99.9% pure aluminium base. The pitched design of the flashing delivers a less-distorted cone when fit to a steeper pitch.
Seldek Aluminium is a fast and economical way to flash a tile roof with a pitch between 0° and 45°. Ideal for use with standard pipes where constant heat temperatures go up to 115°C and intermittent ones go up to 150°C, Seldek Aluminium is available in multiple diameters. With a choice of either grey or black or the option to paint it, you can find the perfect fit for your needs.
There are no product downloads to show.
Question:
Should this plate be fitted on the outside of the roof or on the inside around a twin wall log burner flue? Thanks
Answer:
The plate needs to be dressed around the tiles on the roof.
Question:
Will it take the heat of a chiminea
Answer:
no you will need the red version
Question:
Can I use this on a twin wall flue 177mm please?
Answer:
If your pipe size is 177mm then this would not be suitable you would need to go up to the 160mm-300mm size.
The product code for this is SDA103B.
Question:
What are the dimensions of the base plate?
Answer:
496mm x 496mm
Question:
Hi there, will this flashing be suitable for a twin wall wood burner flue?
Answer:
This is for pipes where constant heat temperatures go up to 115°C and intermittent ones go up to 150°C
Question:
Can it be used on a felt roof?
Answer:
No This is not for a flat roof I will email you some other ideas
Question:
What are the dimensions of the aluminium plate of this pipe flashing?
Answer:
Hi Jagir
The back plate is 500mm square
Question:
is this suitable for a wood burning flue?
Answer:
It would depend how hot the Flue may get, this can be used with pipes up to 115°C constant and 150°C intermittent.
Question:
Is the Seldeck flashing suitable for a 50mm pipe.
Answer:
This can accomodate pipes from 50mm to 170mm so is just suitable for you.
Question:
Can this be used on commercial ducting that is 400mm wide. Ducting vent exits through a tiled pitched roof
Answer:
Thanks for contacting us, the product you have been looking at is intended to work between a ducting range of 300m-450mm so your 400mm should be fine, the base plate included with the product also will work with tiles or slates so should be perfectly fine.
Pay in 4 interest-free payments of £4.555
Learn more