These adaptors allow the on-site conversion of UB19 Tile/Slate vents to service terminals. The felt sleeve click-fits in place into the underside of the UB19. The stepped adaptor is cut off at the required diameter and then pushed onto the sleeve. The joint between the felt sleeve and adaptor should be sealed with PVC solvent weld.
Colour: Black
Weight: 0.26kg
Material: Styrosun® 3600 UV Resistant High Impact Polystyrene.
There are no product documents to show.
Question:
For UBBINK roof tile vents does the Felt Sleeve & Adaptor (Product code 50544180) fit the UB62 type vent (e.g. Product Code 294850)
Answer:
If you are using a UB62 vent then you only need the stepped adaptor part to use it for extraction, you can get that part on it's own on the link below.
https://www.roofingsuperstore.co.uk/product/ubbink-stepped-adaptor-1.html
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.