The Hambleside Danelaw Standard Over Fascia Vent is a highly efficient solution designed to facilitate a continuous flow of ventilating air over fascia boards in both new construction and refurbishment projects. This over fascia vent is crafted with precision to meet standard ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Pay in 3 interest-free payments of £0.00
Learn more
The Hambleside Danelaw Standard Over Fascia Vent is a highly efficient solution designed to facilitate a continuous flow of ventilating air over fascia boards in both new construction and refurbishment projects. This over fascia vent is crafted with precision to meet standard flyscreen regulations, ensuring optimal ventilation without the risk of blockage from overlapping underlay. Its rounded front sections are thoughtfully engineered to maintain an unobstructed airflow, promoting a healthier roof space.
With an impressive airflow capacity of 10,000mm² per metre, the Hambleside Danelaw Standard Over Fascia Vent is a reliable choice for maintaining proper roof ventilation. The vent comes in a convenient 1-metre length, featuring a sleek design with dimensions of 33mm in width and 19mm in height. Constructed from durable polypropylene and available in a classic black colour, this over fascia vent not only delivers superior performance but also seamlessly integrates into the overall aesthetics of any roofing project.
Question:
Dear Matthew - your answer seems at variance with the advice given in the third question on the list of q&a where it says - "Question: Can it be installed near the wall to let air come through? Answer: You can install this vent beneath the metal roof sheet eaves, ensuring continuous airflow along the fascia. It meets UK ventilation standards and acts as an effective insect barrier." It can be installed next to an abutment wall and flash down over the top as well" Can you confirm either way so that I can cancel my order if necessary. Many thanks
Answer:
I understand your confusion due to the varying responses. The Hambleside Danelaw Standard Over Fascia Vent is primarily designed to provide ventilation at the eaves of a pitched roof, sitting above the fascia board and allowing air into the roof space. For abutment against a wall, particularly on a flat roof, the product may not be suitable as the ventilation requirements and detailing are different. Typically, dedicated flat roof abutment vents are used in these scenarios. The product literature does not describe this vent as suitable for flat roof abutment applications. If you intend to use this vent for an abutment wall on a flat roof, it may be best to reconsider your options or consult with a roofing specialist to ensure the product fits your specific needs. If this product doesn't meet your requirements, I recommend contacting customer service to assist with cancelling or amending your order.
Question:
Can this be used as an abutment vent on a flat roof?
Answer:
The Hambleside Danelaw Standard Over Fascia Vent is primarily designed to provide roof space ventilation at the lowest level of the roof line, over the fascia board in both new build and refurbishment details. It may not be suitable as an abutment vent for a flat roof. Abutment ventilation typically requires a specific design to accommodate the junction between the roof and the wall. We would recommend checking with a roofing professional or consulting our range of abutment vents for a product designed specifically for this purpose.
Question:
What are the dimensions h x w x l How is it fixed Can you send a detail?
Answer:
The dimensions of the Hambleside Danelaw Standard Over Fascia Vent are as follows: Length is 1 metre, Width is 33mm, and Height is 19mm. In terms of fixing, the over fascia vent can be easily installed by placing it over the fascia board. Its design allows it to sit securely in place. However, for additional security, it can be nailed or screwed into place. For more detailed information, you can refer to the technical drawing available here: Technical Drawing.
Question:
Can it be installed near the wall to let air come through?
Answer:
You can install this vent beneath the metal roof sheet eaves, ensuring continuous airflow along the fascia. It meets UK ventilation standards and acts as an effective insect barrier.
It can be installed next to an abutment wall and flash down over the top as well
Question:
does this come in any other colour?
Answer:
Sorry No
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
