Available in 3 height options, the traditional dry fix valley trough
is suitable for use in tile and slate pitched roofs. The traditional
dry fix valley has options to suit high profile tiles, low profile or
plain tiles and slate tiles.
Length: 3m.
Width: 370mm.
Upstand height: 55mm.
Thickness: 2mm.
Roof pitches:
17.5° to 22° - 350mm lap.
22.5° to 29° - 300mm lap.
30° to 39° - 200mm lap.
40° to 49° - 150mm lap.
Weight: 3.6kg per m2.
Material: GRP.
Colour: grey.
Fire rating: SAB to BS 476 Part 3 Class 3 to BS 476 Part 7.
1.
Valley boards should be fitted of sufficient width to provide support
for the roofing battens, either: min. 12mm ply lay boards set between
rafters, or 6mm continuous ply boards laid over the rafters.
2. A single strip of roofing underlay should be laid up the centre of the valley.
3. Counter battens the same depth as the roofing battens should be fitted onto the valley boards.
4.
The main roofing underlay should be laid over the counter batten.
Roofing battens should be fitted with the ends firmly located onto the
valley boards, positioned close to the counter batten, with care taken
to avoid damaging the underlay.
5. The fascia board should be cut to
allow the GRP valley trough to pass through and discharge into the
gutter without flattening out. The end of the GRP valley trough should
be trimmed using a fine toothed hacksaw to the appropriate centre line
of the gutter - which normally entails a ‘v’ shaped cut.
6.The GRP
valley trough should be fitted with care taken to ensure it is centrally
located between the valley boards - the sides should be nailed to the
counter battens at max: 500mm centres.
GRP lasts as long as lead, is tougher, cheaper, more resistant to accidental damage, and is less prone to theft or vandalism. Using preformed GRP valley troughs saves significant installation time over traditional methods. Roofers report elimination of many problems with valley troughs when changing from lead to Corodrain GRP. Coloured lead grey as standard (other colours available on request).
Question:
For use with slate, would you recommend this product or would you use a different height upstand? Slate size is 500 x 250mm. Thank you.
Answer:
This item would be suitable for fibre cement slates.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.