This Coldseal Self-Adhesive Top Sheet Roofing Felt from IKO is a part of their Easyseal system that doesn't need any flames during installation. As a result, you have an increase in safety and a reduction in difficulty for application. Manufactured from a polyester base with a... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out moreThis Coldseal Self-Adhesive Top Sheet Roofing Felt from IKO is a part of their Easyseal system that doesn't need any flames during installation. As a result, you have an increase in safety and a reduction in difficulty for application.
Manufactured from a polyester base with an SBS (Styrene Butadiene Styrene) bitumen coating, this Easyseal roofing top sheet also features an upper surface with a special finishing of slate mineral. The release film protects the underneath of the sheet and can easily be removed with ease when installing to BS 8217: 2005, 'Code of Practice for Reinforced bitumen membranes for roofing' and IKO fixing guidelines.
With a two-layer system, Easyseal systems are ideal for smaller roofing applications, including porches, garages, extensions and dormer windows. They are also usable on larger-scale applications due to the easy no-fire installations as per IKO's 'Step by Step' fixing instructions.
The self-adhesive properties eliminate the need for gas torches and hot works, hot bitumen, and any other messy sealants that CAN make installations irritable and time-consuming.
Please note:
Question:
Will cold seal flat roofing felt seal to concreat and stainless steel
Answer:
You would need to primer the concrete and use some kind of flashing tape on the steal section (as long as its a small section)
Question:
Hi, can I put top sheet straight onto new osb roof without using the underlay
Answer:
Technically yes, however, its always good practice to use an under, to give better protection
Question:
Hi as a follow up question concerning applying this over existing shed felt. Is there a reason why this should not be applied over existing roof felt? Can't the bonding be made safe by adding some felt adhesive?
Answer:
The glue on the Easyseal will not stick to existing felt.
Question:
How long roughly will this last on a slightly pitched garage roof?
Answer:
If installed to the manufactures spec's 10+ years - depending on heavy weather and location
Question:
Could this be used on an old poly-carbonate roof on a car port to tidy it up
Answer:
This would normally need to be laid onto boards. So not really ideal for use on Polycarbonate.
Question:
We have just had our garage dry lined and it has a bubbled mebrane finish. Can this go ontop?
Answer:
Best to send us photos of the roof along with your enquiry to sales@roofingsuperstore.co.uk so we can check the suitability for you.
Question:
What colour is the face of this product ?
Answer:
This is a green finish.
Question:
Would this be ok for a pitched roof on a big shed?
Answer:
Yes you could use this installed onto boards on a shed roof.
Question:
can this be applied directly onto a bitumen painted roof ?
Answer:
Yes this could be laid on top of that surface.
Question:
hi, can you apply this over existing felt?
Answer:
Unfortunately not this would need to go onto boards I am afraid so the old felt would have to be removed first.
Question:
Hello can you explain the difference between this and the underlay? Do both products need to be used together? Also will this be suitable for use onto osb?
Answer:
For a fully secure system you would need to apply the underlay first, then this cap sheet on top to finish the roof.
This is fine to be applied directly onto OSB board, but you can also use the Primer first to ready it for application.
Products We Recommend
Product Enquiry Form
Pay in 4 interest-free payments of £13.75
Learn more