The Super Shed felt from IKO is a high-quality roofing material boasting durability and longevity. The polyester-reinforced felt offers an attractive green mineral finish. Each roll of Super Shed felt measures 1 metre by 8 metres with a tough waterproof membrane design for pro... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Pay in 3 interest-free payments of £0.00
Learn more
The Super Shed felt from IKO is a high-quality roofing material boasting durability and longevity. The polyester-reinforced felt offers an attractive green mineral finish. Each roll of Super Shed felt measures 1 metre by 8 metres with a tough waterproof membrane design for protection from the elements for up to 15 years.
For roofs with a low pitch ranging from 10° to 20°, it is essential to incorporate a waterproofing underlay beneath the primary waterproofing finish. As for packaging, the product comes in a dark red/brown packaging that includes detailed instructions for easy installation.
Please note:
There are no product downloads to show.
Question:
It says for roofs with a low pitch ranging from 10° to 20°, it is essential to incorporate a waterproofing underlay beneath the primary waterproofing finish. What would a waterproofing underlay please and is the 'primary weaterproofing finish the felt roll? Thanks
Answer:
In roofing terms, a waterproofing underlay is an additional protective layer that's installed beneath the main roofing material. This underlay acts as a secondary barrier to prevent water or moisture from seeping into the structure of the roof, especially in areas with low pitched roofs between 10° to 20° where water flow may be slower. The 'primary waterproofing finish' you referred to is indeed the IKO Super Shed Roofing Felt. This is the main layer that covers the roof and is exposed to the elements. It provides the first line of defense against rain, snow, and other weather conditions. The underlay is an added layer of protection underneath it. Please ensure to browse our range for suitable underlays for this purpose or you can contact our customer service team for guidance on choosing the most suitable waterproofing underlay for your project.
Question:
What is the weight of IKO Super Shed Roofing Felt Code MW211100 Either weight of 8m x 1 m roll or weight per sq m Thanks
Answer:
Approx 18kg
Question:
hi can this product be joined verticaly for longer length
Answer:
No, this would not be advised
Question:
Hi there im looking to re felt my shed as the winds taken the felt off , im a novice at this and was wondering if i can get some ideas as to what ill need , its a 8ft by 6ft shed ideally i want something strong that can survive the wind , plus do i just nail it or should i also stick it ? If so what with
Answer:
I have tried calling you but your number is dead. Please call in and speak to one of the team or send in an email
Question:
what is weight of rool, please?
Answer:
Hi Terry
Approx 18kg
Question:
Is this available in 10M Length Rolls?
Answer:
Unfortunately not, only available in this one standard roll length, apologies.
Question:
Can you lay this on OSB board and just use one layer?
Answer:
Yes this can be laid just one layer over OSB board no problem.
Question:
What product do you as underlay for this felt?
Answer:
You would not normally use an underlay with this shed felt, this would be your sole membrane on the shed roof. You could also use a roof felt adhesive to fix it.
Question:
I am in the middle of extending my sons workshop which was 8mtrs long its now 12mtrs long as i intend to use felt .I notice that rolls only come in 8mtr lengths is it ok to join on the ends with adhesive and stagger the joints.
Answer:
Yes you can overlap roofing felt not a problem, just make sure you leave a suitable adhesive/sealant under the lap and overlap at least 200mm.
Question:
Do you need to apply a roofing felt adhesive ( such as Black Jack 904) onto a wooden shed roof, covering the full area of roof, prior to applying the IKO Super Shed Roofing Felt...and then also nail down with galv. clout headed nails?
Answer:
You do not have to use adhesive it is fine to apply it with just nails, but if you were looking for a longer lasting more secure application then adhesive along with nails will provide a better overall installation.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
