TGX Torch On Capsheet consists of a polyester carrier coated with polymer-modified bitumen. The upper surface has a green or black finish of mineral granules, while the lower surface has a sacrificial film which rapidly melts during the torching operation. A 90mm sacrificial f...Read More
TGX Torch On Capsheet consists of a polyester carrier coated with polymer-modified bitumen. The upper surface has a green or black finish of mineral granules, while the lower surface has a sacrificial film which rapidly melts during the torching operation. A 90mm sacrificial film selvedge facilitates the bonding of side laps.
Manufactured by IKO, these TGX Torch on roofing membranes use polyester and glass reinforcements to ensure exceptional dimensional stability. The reinforcements are impregnated and then coated with a polymer-modified bitumen, which provides good high-temperature performance and resistance to damage and marking during application.
There are no product downloads to show.
Question:
What is the thickness?
Answer:
Approx 4mm
Question:
Can you use over existing fibreglass roof?
Answer:
Technically Yes, however, I would advise to use an underlay as well
Question:
Can this be used as a single layer?
Answer:
Technically, Yes but I would recommend an underlay as well
Question:
Can this be used directly onto the timber deck or would underlay be required as well?
Answer:
it is always good practice to us an underlay
Question:
What is the weight of this 8sqm roll of cap sheet?
Answer:
Hi Paul
You are looking at approx 32kg per roll
Question:
Is this breathable?
Answer:
The product on it's own is not breathable however, if you add a venting layer like the following: https://www.roofingsuperstore.co.uk/product/iko-torch-on-venting-layer-20m-x-1m.html, this will make it a breathable system.
Question:
How thick is this felt how many mm?
Answer:
4mm.
Question:
hi,,I have a new garage with a new flat roof,,USB3 board on top...I want to torch on felt but I don't know if I have to put something else first first,thank you.
Answer:
With Torch on Felt the standard would be a 2 part system of an underlay then torch on cap sheet.
Question:
What would the best covering to use if I didn't want to torch it?
Answer:
EPDM rubber is a good alternative to Torch on felt, you can find a handy calculator for this below.
https://roofkit.roofingsuperstore.co.uk/classicbond
Question:
Could you please detail how thick the felt is?
Answer:
4mm thick.
Pay in 4 interest-free payments of £9.4175
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
