Ideal for mechanical and natural/passive ventilation applications with a low roof pitch from 5° up to 25°, this Ubbink Multivent terminal has been specially created for systems that need a low-resistance terminal. It is suitable for use on roofs with a tiled or slate finish. ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Pay in 3 interest-free payments of £0.00
Learn more
Ideal for mechanical and natural/passive ventilation applications with a low roof pitch from 5° up to 25°, this Ubbink Multivent terminal has been specially created for systems that need a low-resistance terminal. It is suitable for use on roofs with a tiled or slate finish.
The pipework above the roofline is twin-walled and integrates a built-in condensation drain. The UB35 model has a 160mm internal diameter, and the 160mm diameter unit has a 20,000mm² free vent area. It has a pressure airflow resistance of less than 1.0 pascal at 225m³/h. The stack and cowl are manufactured from polyethylene, while the tile flashing is fabricated from polyethylene and Ubiflex.
There are no product downloads to show.
Question:
Is this suitable for an extractor fan? Would the internal pipe be cut down to fit?
Answer:
This terminal is suitable for mechanical ventilation installations, so it may be suitable for an extractor fan system. The product information doesn’t specify whether or how the internal pipe can be cut down. Please check with the supplier or our technical team to confirm compatibility and fitting requirements for your fan.
Question:
Can it be installed for Marley corrugated roof tiles?
Answer:
Any Tile and any Slate
Question:
Can you confirm this is 150mm? In the title it says 150mm but in the description it says 160mm.
Answer:
Its 150mm
Question:
Can this flue terminal be used with a gas fire?
Answer:
No, this is for venting roof space or bathrooms and kitchens
Question:
Is it suitable for extractor fan
Answer:
100% Yes
Question:
Can this be used to extract straight through a roof for an extractor above a electric hob ? Also how long is the pipe you send with it ?
Answer:
Its a 300mm long pipe on the bottom of the unit
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
