Made in Wales from over 60% recycled slate, this tops the range in both performance and looks with a proven track record on pitches down to 15°.
Cambrian Slates embody the beauty and character of natural slate. Made in Wales from over 60% recycled Welsh slate, Cambrian tops the range in both looks and performance and has a proven track record even on pitches as low as 15°. Whilst light in weight, Cambrian's unique three point fixing makes it suitable for even the most exposed sites.
Size : 300mm x 336mm.
Minimum pitch : 15° at 75mm headlap.
25° at 50mm headlap.
Maximum pitch : 90°.
Coverage : 15.9 slates/m2 - 210mm gauge.
14.8 slates/m2 - 225mm gauge.
13.3 slates/m2 - 250mm gauge
Weight : 1.24 tonnes/1000.
Batten size : 38mm x 25mm - rafter centres up to 400mm.
50mm x 25mm - rafter centres up to 600mm.
Battens required : 4.76m/m2 - 210mm gauge.
4.44m/m2 - 225mm gauge.
4.00m/m2 - 250mm gauge.
Nail size : 30mm x 2.65mm.
BBA certified.
There are no product downloads to show.
Question:
What is the lowest pitch for the Cambrian Tile
Answer:
Hi Taffa
Size : 300mm x 336mm.
Minimum pitch : 15° at 75mm headlap.
Question:
I have lost 3 adjacent tiles (horizontally), not verge or eaves tiles, from my roof and hope you can help me to identify which tiles I have lost. I have found broken bits that indicate they are Redland Cambrian, and dimensions suggest they are product code 10001760. Because of the growth on the tiles it is difficult to tell what the finish is other than slate colour. Are there any other tell-tail details I need to note to make sure I order the correct replacements? All the surrounding tiles feel secure. Do you have a way of fixing replacement tiles without going back to the verge or the ridge? There don't seem to be any nails or clips left behind that might have been used to hold the lost tiles. Thanks Will Birkinshaw
Answer:
Good morning Will
Are you able to email over some photos just so we can double-check please sales@roofingsuperstore.co.uk
Question:
Hi there, What velux flashing kit should I use for Cambrain slates. All in one flashing?
Answer:
For a Redland Cambrian you would need Velux EDW Flashing, or EDJ if going for an recessed installation.
Question:
my roof pitch is 15 degrees in certain rain and wind conditions rain is blowing up under the tiles the tiles on my roof are cambrian ,how can i overcome this problem
Answer:
If installed correctly Cambrian Slates can be installed down to 15°. We would suggest getting a roofer to have a look and make sure they have been installed at the correct Headlap.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.