Sika Black Jack 904 is a cold-applied, oxidised bitumen-based adhesive designed for securely bonding roofing felt to surfaces including metal, concrete, timber and existing roofing felt. Offering high bond strength, it forms a tough yet flexible film that responds to changing ... Read More
SUPER rewards Earn points and save £££ on our SUPERSTORES
Find out morePay in 3 interest-free payments of £0.00
Learn moreSika Black Jack 904 is a cold-applied, oxidised bitumen-based adhesive designed for securely bonding roofing felt to surfaces including metal, concrete, timber and existing roofing felt. Offering high bond strength, it forms a tough yet flexible film that responds to changing temperatures, making it a practical choice for horizontal roofing applications.
Supplied in a 5L tin, Sika Black Jack is suitable for sealing roofing felt laps, and can also be used as a cold-gritting adhesive for securing mineral chippings to the final felt layer. No heating is required before application, helping simplify installation, while the adhesive typically dries in around 24 hours, depending on conditions. Once cured, it creates a strong, flexible and waterproof bond.
Please note:
Question:
Can I paint my garden fence with this and leave it exposed to sunlight
Answer:
No, technically its dont designed for that and will drop in the heat
Question:
Is this product suitable for sticking down rubber roofing on to existing roofing felt?...
Answer:
No, Firstly you cant stick EPDM to felt only wood or concrete. Secondly, this product will glue felt to felt or wood only
Question:
Can I apply the adhesive in this very cold weather, at a temperature only a few degrees above freezing. How about if I warm the tin indoors first?
Answer:
no, you will need it to be around 7 degrees or you may not get a good seal
Question:
I need to stick foil faced insulation board to an existing mineral felt flat roof to create a warm roof before laying Edpm. Is black jack a suitable adhesive.?
Answer:
No, this will not work please call in and one of the team will be happy to help you with the correct adhesive
Question:
Will this product stick down self adhesive felt edges and overlaps?
Answer:
It will yes however the product most commonly used for this is the below:
https://www.roofingsuperstore.co.uk/product/felt-shingle-lap-sealant-295ml.html
Question:
Will Black Jack flashing tape stick to lead box guttering?, or should I use adhesive as well? If I do need adhesive , which one?
Answer:
Black Jack Flashing tape is Bitumen backed so should stick fine to Lead as long as it is clean/dry before fixing.
Question:
Will this stick to polycarbonate roofing sheets?
Answer:
This is not really ideal for use on Polycarbonate, more on porous materials like felt or timber.
Question:
Can you use to stick roofing felt onto plywood?
Answer:
Yes this would be suitable for that purpose.
Question:
How long does take to dry?
Answer:
Drying time is 24 hours depending on drying conditions
Question:
Can you use Black Jack felt adhesive to stick down torch on felt? Thanks
Answer:
You can but we would only advise this application on shed roofs/garden buildings etc. Not on a main roof of a hosue where you would ideally torch apply the felt.
Question:
Will product work on rubber?
Answer:
No, This product will not adhere to EPDM, or PVC single ply membranes
Products We Recommend
Product Enquiry Form