Order Helpline 01752 692 760 | Open today 8:00am-5:00pm

Tapco RidgeMaster Plus Vent Inserts - 10x 1200mm Pieces per Pack

Product Code:
Est. Delivery: 7-12 Working Days
Shipping costs displayed in basket.
We can let you know when this product is back in stock.

This product is proving to be very popular and has unfortunately sold out.

Enter your email below and we'll notify you as soon as this product is back in stock:

Subject to stock availability, if products on a 24 hours service are ordered alongside products NOT on a 24 hours service, this may delay your whole order.

View Transport Policy

All delivery charges are included in the final shopping basket and are dependent on the products Scottish Highlands & the Islands where additional shipping charges will apply.

Please note that not all products will incur an additional delivery charge to the Scottish Highlands & the Islands – this is based on the costs from the manufacturer, distributor or courier providing shipping on our behalf. If your delivery address is in the Scottish Highlands and Islands, a member of our helpline team will contact you prior to processing your order should an additional delivery charge apply.

While we make every effort to ensure orders are delivered by the date required, we cannot guarantee availability from the manufacturer or the manufacturer's delivery schedules.

Any variation to web delivery date given will be advised to you by email or telephone. If we are unable to make delivery because access is not possible, we reserve the right to make a failed delivery charge.

£91.76 Incl. VAT
Oops! Please select from the options

Product Description

RidgeMaster Plus offers integral ridgeline ventilation, mechanically fixed in conjunction with Tapco ridge and hip tiles.

This product is inserted beneather the ridge.

Installation Guide
We recommend RidgeMaster Plus 11" (279mm) to meet your ventilation requirements.

Make sure to follow the steps below when installing TapcoSlate and RidgeMaster Plus.

1. Cut a 1" (25mm) opening in the ridge of the roof, end all cuts 12" (305mm) from outside walls, chimneys, ridge corners or hip joints.

2. Install slates up to the opening.

3. Fold felt over last course of slates or install metal J channel to prevent the infiltration of fine powder snow between keyways.

4. Install RidgeMaster Plus using 3" (76mm) roofing nails.

RidgeMaster Plus should be installed 12" (305mm) beyond the slot opening.

For best appearance install RidgeMaster Plus along the entire length of the ridge.

5. Install TapcoSlate Ridge Cap pieces over the RidgeMaster Plus, nailing in the designated RidgeMaster Plus nail target area.

Use 3" (76mm) long Stainless Steel nails.

6. RidgeMaster Plus has an overlap and an under lap end that interlock when laid end to end in proper orientation.

This unites the 4 foot (1.22m) sections into a single structural integrated, weather tight system.

Always install RidgeMaster Plus with overlap end on outside terminal end of ridge.

You should also complete your ridge vent with factory end on the opposite terminal end of the ridge.

RidgeMaster Plus will provide 12.228 square inches (7889mm²) of NFVA per linear foot.


This product is only avaliable in the slate grey (703) colour but is not visible once the ridge is installed.

Ridges are NOT included with this product and need to be purchased seperately.

Product Documents

Products We Recommend


Questions & Answers

There are currently no questions for this product.

Product Enquiry Form

Tapco RidgeMaster Plus Vent Inserts - 10x 1200mm Pieces per Pack

*Required Field

Would you like to empty your basket?

Yes No


It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.

If you wish to access our site please either upgrade your browser or download an alternative.