Suitable for a Asphalt roof covering, Ubbink’s OFT/4 flat roof vent/terminal can be used in soil and vent systems, and for natural (passive) or mechanical ventilation installations.The OFT/4 has a special low air resistance cowl - the pressure/airflow resistance is <1.0 Pascal at 225m3/h. The pipework above the roofline is twin walled and incorporates an integral condensation drain. The stack pipe has an integral collar and separate aluminium flange for use with both felt and asphalt.
The Ubbink OFT/4 range is available in five different flange types for different roof coverings, Asphalt, EPDM, Bitumen and PVC, to allow termination through a flat roof to ducting up to 166mm. The stack cap is fixed mechanically so that it is more secure when installed in extreme weathers, however this can be removed for servicing purposes.
Material: Polyethylene/Aluminium
Weight: 1.78kg
Diameter: 110mm
Height Above Roof: 300mm
Flange Diameter: 395mm
Depth Below Roof: 350mm
Free Vent Area: 8400mm2
Pressure/Airflow Resistance: 1.0Pa
There are no product downloads to show.
Question:
Hi Would this be suitable to connect to a 100mm bathroom extract fan? going through a flat roof? And how would I fix it to the roof to ensure water tightness?
Answer:
This would be suitable for 100mm, you need to dress the roof covering over the flange to ensure a tight seal but the roofer completing the work can normally assist with this.
There are currently no reviews for this product
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.