Ubbink universal insulated terminals are suitable for both tiled and slated roofs and come complete with a Ubiflex flashing. These units are suitable for roof pitches over 25° and for mechanical extraction. Ideally suited for the ventilation of kitchens. Not suitable for indus...Read More
Ubbink universal insulated terminals are suitable for both tiled and slated roofs and come complete with a Ubiflex flashing. These units are suitable for roof pitches over 25° and for mechanical extraction. Ideally suited for the ventilation of kitchens. Not suitable for industrial/commercial buildings. The pressure airflow resistance of all units is
Question:
Does this product require a coupler to connect to 150mm spiral ducting?
Answer:
No, you should be able to connect directly to it
Question:
We are in an exposed coastal position. is the vent termination vertical and driving rain proof?
Answer:
The vent is at the bottom of the top section so should hold up to driving rain
Question:
Is it also ok to use it on an intake for mvhr unit or just extraction?
Answer:
No this is for extraction only - you will need to check with Ubbink for an MVHR unit vent as well don't have any listed 01604 433000
Question:
Is this suitable for using with a heat recovery system?
Answer:
I can confirm this terminal is suitable with a MVHR unit.
Question:
Is this suitable for use with an air conditioning unit?
Answer:
This will work with an extractor fan, not sure why you would need one with an air conditioning unit
Question:
Can I use this to connect to a Flexi flue liner serving my 6.8 kw gas fire?
Answer:
for mechanical extraction. Ideally suited for the ventilation of kitchens - I will email the correct unit to use
Question:
Is this suitable for an extractor fan over a Falcon range oven which gets very hot?
Answer:
The vent is linked to the extractor and not the oven so it should be fine
Question:
Hi - is there a version of this for roof pitches of less than 25 degrees?
Answer:
Closest unit would be the one linked below for low pitches.
https://www.roofingsuperstore.co.uk/product/low-pitch-ubbink-ub35-150mm-black-multivent-terminal-tile-slate-.html
Question:
Is the vent covered at the top? I'm installing an extractor hood that recommends 150mm diameter ducting. The hood will be directly below the ub47 and I'm worried that rain water will get in through the ducting. Also is there a condensation drainage solution that you do for any vapour that trickles down?
Answer:
This is covered at the top, and the vents do feature condensation traps to drain away.
Question:
Could the UB47 150mm be used on a double pantile roof?
Answer:
Yes - the base comes complete with a Ubiflex flashing to suit.
Question:
Is this suitable for a bathroom extractor fan?
Answer:
Yes as long as the fan ducting has a diameter of 150mm as this is the diameter of this unit.
Question:
Is the Ducting Diameter 150mm? I am planing to use it with standard kitchen extractor Fan ?
Answer:
This unit is to suit 150mm ducting, it's suitability all depends on what size ducting you need to fix onto it. Most kitchen fans are 110mm so worth checking the one you have before purchasing.
Question:
Is this suitable for a 980m³ kitchen extractor?
Answer:
We have checked with the suppliers who have confirmed this will be suitable for your extractor.
Pay in 4 interest-free payments of £15.265
Learn moreStart right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
