Aluminium Secret Fix Coping - Made per Specification Aluminium secret fix copings (no screws necessary). Specification 2mm thick aluminium secret fix coping with 520mm girth, 4x bends PPC standard RAL colour - 7031. Length : 3.1m - x1. Corner : 45 degree - x1. Len... Read More
Aluminium Secret Fix Coping - Made per Specification
Aluminium secret fix copings (no screws necessary).
Specification
2mm thick aluminium secret fix coping with 520mm girth, 4x bends PPC standard RAL colour - 7031.
Length : 3.1m - x1.
Corner : 45 degree - x1.
Length : 1.325m - x1.
Bend: 45 degree - x1.
Length : 2.505m - x2.
Corner : 90 degree - x1.
Length : 2m - x2.
Colour : all powdercoated to RAL 7031.
If you have a specification or require a price for an aluminium secret fix coping please call us on 01752 692760 and we can either do a take off and price the job for you.
Aluminium copings
Our secret fix aluminium coping system with its hidden brackets provides a smooth Clean outline to roof edges, whilst protecting parapet walls from damaging air- bourne pollution, rain and snow.
Secret fix aluminium copings can be supplied in mill finish aluminium or powder coated to most BS or RAL Nos, allowing the coping to be colour matched with the other parts of the buildings structure. The coping can also be fabricated with either a flat top or sloping profile and overhangs the brickwork to allow water to run off clear of the wall edge. The system includes a variety of corner junctions pieces and expansion joints to meet different design demands.
Fixing instructions
Prior to fixing – On arrival on site copings should be thoroughly checked to ensure That material is as ordered and has no damage. It is advisable to lay out coping prior to fixing to ensure sufficient quantities and to familiarise with the position of the Components.
Cutting
Coping may be cut using normal metalwork tools as required. All cuts should be de-burred. If powder coated coping is cut a touch up can be supplied at extra cost.
Fixing
Coping is supplied with 3 fixing brackets per length, one joint and 2 intermediate. One should be fixes at each end and intermediate at approximately 1000mm centres. On long runs it is advisable to use a builders line to ensure good alignment of brackets. It is advisable to fix fittings first and then cut lengths of coping to suit. Brackets should be fixed with corrosion resistant screws. Length and gauge of screws are dependant on the substrate.
Thermal expansion
A 3mm gap should be allowed at all joints to allow fo thermal expansion.
Wall flashings / angles / cill sections
Wall flashings, angles and cill sections can be fabricated to a multitude of shapes and sizes to provide a professional finish to the structure. They can be powder coated to most BS or RAL numbers to provide that matching finish to the rest of the structure. Jointing sleeves can be provided if required.
There are no product specifications to show.
There are no product downloads to show.
There are currently no questions for this product.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
