Manufactured from recycled PVC, this 1.5m long rigid roofing Felt Support Tray is a cost-effective solution for protecting exposed roofing felt or underlay at the eaves. When left uncovered for prolonged periods, UV rays from the sun will cause the roofing materials to degrade... Read More
Complete your project:
Screws
1 option Change
SUPER rewards Earn points and save £££ on our SUPERSTORES
Find out more
Pay in 3 interest-free payments of £0.00
Learn more
Manufactured from recycled PVC, this 1.5m long rigid roofing Felt Support Tray is a cost-effective solution for protecting exposed roofing felt or underlay at the eaves. When left uncovered for prolonged periods, UV rays from the sun will cause the roofing materials to degrade and rot over time.
Thanks to its rigid construction, not only will this Eaves Guard Felt Support Tray direct rainwater into your gutters, but it will also prevent ponding from occurring behind your fascia boards, stopping the underlay from sagging between the rafters. These qualities make it a highly recommended addition to projects where the fascia boards are being replaced.
Suitable for use on all roofs, when installing your felt support trays, place it on top of the fascia board and secure it to the rafters using corrosion-resistant nails.
There are no product downloads to show.
Question:
I have a felt shed roof. Can I install these on top of the newly installed felt to help with drainage and to avoid ponding at the lower end?
Answer:
I'm afraid the Eaves Guard Felt Support Tray might not be the best solution for your concern. These trays are designed to provide support underneath the roofing felt at the eaves, not on top of it. They help to prevent sagging between the roof deck and gutter and direct water into the gutter, but they aren't designed to address drainage or ponding issues on the surface of a finished felt roof. For issues with ponding or poor drainage, you may want to explore other roofing solutions or consult with a roofing professional to get the best advice for your specific situation.
Question:
do you do them in Black ??
Answer:
I'm sorry for any confusion, but currently, our Eaves Guard Felt Support Tray is only available in grey. This product is manufactured from PVC and is designed to provide an immediate and cost-effective solution to protect the eaves of your roof. If you're looking for a similar product in a different color, I would recommend browsing our Pitched Roofing category on our website or contacting our customer service team who may be able to help you find a suitable alternative.
Question:
does this fit over the top of a breather membrane and then underneath a felt tile?
Answer:
Yes, the Eaves Guard Felt Support Tray is designed to be installed above the breather membrane and underneath the roofing felt. It acts as a protective layer to guard against damage to the roof underlay or felt, making it a great choice for both eaves refurbishment projects and new builds. For more detailed information, you can check out the product page on our website here.
Question:
Does the breather membrane go on top or under the protector?
Answer:
on top
Question:
How exactly are these eave protectors laid? Could I get a step by step guide on the correct way to install them please. Thank you.
Answer:
There are no fitting instructions im afraid, you need to over lap them by a minimum of 100mm
Question:
How exactly are these eave protectors laid? Could I get a step by step guide on the correct way to install them please. Thank you.
Answer:
I have sent you an email
Question:
what do you advise to fix this to 18mm OSB?
Answer:
You would just nail these along the eaves, not specilist fixings required.
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
