Compatible with Marley Mendip roof tiles, this Ubbink UB62 Double Pantile In-Line Roof Tile Vent will provide high-performance ventilation while maintaining the roof's aesthetic design. Made from polypropylene material, it is suitable for all pitches above 25°.This UB62 Vent c... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
Compatible with Marley Mendip roof tiles, this Ubbink UB62 Double Pantile In-Line Roof Tile Vent will provide high-performance ventilation while maintaining the roof's aesthetic design. Made from polypropylene material, it is suitable for all pitches above 25°.
This UB62 Vent can be used for both high and low-level ventilation, replacing or supplementing other ventilation systems like dry ridges, abutments, and eaves. It is also ideal for compartmental roof spaces, such as firewalls. It provides a 15,000mm² free vent area and features a large insect and vermin grille.
When using a stepped adaptor, this UB62 Vent can also be utilised for mechanical extraction or with solid pipes for the removal of foul air.
There are no product downloads to show.
Question:
My contractor has retro-fitted tile vents to a house Existing roof tiles are laid over breathable membrane but has left the felt intact Is this good practice or should the felt be cut to achieve correct air flow
Answer:
In general, when installing tile vents such as the Ubbink UB62 Double Pantile In-line Roof Tile Vent, it's usually recommended to cut the underlay or felt to allow for proper airflow. This helps to maximise the vent's effectiveness by enabling air to circulate from the interior of the property to the exterior through the vent. However, depending on the specific situation, your contractor might have had reasons for leaving the felt intact. It's best to discuss this with your contractor to understand their reasoning. For more information about the installation of tile vents, you may find it helpful to refer to the Ubbink Vent Range Brochure, which you can find here.
Question:
Could you please tell me the dimensions of this product in cm. Can this also be used for mechanical extraction?
Answer:
The dimensions are Length - 42cm, Width - 33cm. To make this suitable for mechanical extraction you will need to use the below product with this:
https://www.roofingsuperstore.co.uk/product/ubbink-stepped-adaptor-1.html
Products We Recommend
Product Enquiry Form
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
