Available in a selection of height options, this Wallbarn Universal Adjustable Paving and Decking Support from Wallbarn is designed to form flat surfaces for paved or decked structures. While especially suited to use alongside porcelain tiles on podiums and flat roofs, these p... Read More
SUPER rewards Earn points and save £££ on our SUPERSTORES
Find out morePay in 3 interest-free payments of £0.00
Learn moreAvailable in a selection of height options, this Wallbarn Universal Adjustable Paving and Decking Support from Wallbarn is designed to form flat surfaces for paved or decked structures. While especially suited to use alongside porcelain tiles on podiums and flat roofs, these pedestals provide adjustments that are precise to the millimetre with the telescopic stem across various flat surfaces.
The free-standing system requires no fixings, in turn sparing below membranes from hindrance and suiting warm roofs and inverted waterproofing systems. The pedestals create a gap between the paving or decking and the sub-deck for the purpose of ventilation, while effectively hiding unpleasant pipes and cables.
Question:
I'm paving a felt flat roof, do you silicone the pedestals down to the felt or just free standing ?
Answer:
For a felt flat roof, the Wallbarn Universal Adjustable Pedestals are typically free-standing and not bonded to the felt. The standard build-up includes the roof deck, felt or single-ply waterproofing membrane, a protection layer if specified by the membrane manufacturer, the pedestals directly on the membrane, and then the paving slabs on top. The weight of the paving system holds everything in place. Generally, gluing or siliconeing pedestals to the waterproof membrane is avoided because it can potentially damage or react with the membrane, make future inspection and maintenance difficult, and restrict the pedestal's ability to self-level and accommodate movement. However, there are a few things to consider. Firstly, ensure the roof structure is rated for the combined weight of slabs, pedestals and live loads. Some felt manufacturers recommend a separation layer beneath pedestals, particularly on softer membranes. While the pedestals are free-standing, the paving layout should have appropriate edge restraint and may require wind uplift consideration on exposed roofs. Unless the roof designer, membrane manufacturer, or structural engineer has specified otherwise, I wouldn't recommend siliconeing the pedestals down for a typical domestic felt flat roof with 600×600 porcelain or concrete paving on Wallbarn pedestals. If you could tell me what type of felt roof you have (traditional mineral felt, torch-on SBS felt, or EPDM), I can provide more specific recommendations for the layer directly under the Wallbarn pedestals.
Question:
are the lugs on the top removable to give a flat surface
Answer:
The Wallbarn Universal Adjustable Pedestal for Decking and Paving does not have removable lugs on the top. The design is meant to provide secure support for decking and paving. If you need a flat surface, this product might not be suitable for your needs. If you need additional information, we recommend checking the product specifications or reaching out to our technical team for more guidance.
Question:
Can you use this product to support a shed base, and if so is there a recommendation regarding spacing?
Answer:
Yes it can support a shed and around every 400mm
Question:
What diameter is the base and does the base need to be cut to butt up to a wall?
Answer:
Base Plate Diameter: 200mm - Height: 35mm to 50mm - Headpiece Diameter: 120mm - And yes it would need
Products We Recommend
Product Enquiry Form