The Extra Aqua Flat Roofing Vents are an ideal solution for many flat roofing requirements. They can ventilate an area of up to 36 square metres and will bond perfectly to asphalt, bituminous felt and plastic roofing materials. Each vent has a base diameter of 267mm, a height ... Read More
SUPER Rewards Earn points and build more across our SUPERSTORES!
Find out more
The Extra Aqua Flat Roofing Vents are an ideal solution for many flat roofing requirements. They can ventilate an area of up to 36 square metres and will bond perfectly to asphalt, bituminous felt and plastic roofing materials. Each vent has a base diameter of 267mm, a height of 197mm and an aperture base of 184mm.
The vent is manufactured in polypropylene and has a base finish in grey, with the dome covered in white. The dome is fixed to the base with screws into a self-locking brass insert for secure and sturdy fittings.
There are no product downloads to show.
Question:
Can these be used on a rubber roof?
Answer:
Yes, they will just need a mechanical on-site water seal
Question:
I have a problem with condensation on a flat roof, Would these help at the back of the roof?
Answer:
Yes they would help
Question:
Can this be fitted to an existing GRP roof?
Answer:
Yes you will just have to mechanically fix on site
Question:
Do you do black caps ?
Answer:
No, they only come in white
Question:
Could you let me know the dimensions of this just to get an idea of size. Also what would I use to bond this to a bitumen roof, and is there a fixing from the underside to keep it in place?
Answer:
Dimensions
Each Extra Aqua Vent can ventilate an area of up to 36m2
Question:
How do I install on a fibreglass roof?
Answer:
mechanically fix and use exterior sealant
Question:
Can they be fitted to EPDM roofs?
Answer:
If its already installed then you would have to mechanically fix and seal it to the EDPM
Question:
Can the mushroom vent be fitted on fibre glass roof for ventilation?
Answer:
Good Afternoon Harsha
Yes, As long as its a watertight fit
Question:
Are there any dimensions for this product? I’m looking to fit a completely rainproof cowl to vent through flat roof from an extractor on a 150mm duct Thanks
Answer:
Good Afternoon Chris
That product is not designed for mechanical extraction - you need to be looking at something like Ubbink OFT5 Insulated Flat Roof Vent Terminal 150mm Diameter - Asphalt | Roofing Superstore® - we are hoping that they will be back in stock next week
If you require a quote or If you need further assistance, please get in touch with me on 01752 692760 with any questions or just reply to this email and myself or one of my colleagues will be happy to assist.
Question:
does it work with grp ?
Answer:
Yes but you would need to scuff up the flange to help the GRP bond to it.
Question:
Converting garage to residential. There are twelve jousts in the garage. Have been told I will need 24 vents .one each end of each joist... Is this correct
Answer:
These vents can each service an area of up to 36m2 so I do not think you would need as many as one per joist, but more you can ventilate the better.
Question:
Will this work with EPDM
Answer:
Yes, you would need to use the EPDM contact adhesive to dress the membrane over the flange of the vent.
Question:
I do have flat roof on my extension, approximately 40 sqm. How many of these vents are needed for effective ventilation
Answer:
I would say 2 or 3 of them would provide adequate ventilation.
Question:
What free vent Area does this achieve?
Answer:
3,600mm2
Products We Recommend
Product Enquiry Form
0% for 4 months
Learn more
Start right away with 4 months to pay
Enjoy 0% over 4 monthly instalments*
* Subject to status. Minimum spend required. T&Cs apply.
Sorry
It seems you are running an older version of Internet Explorer. Our site does not support these old browsers as they do not house the technology that allows our site to be safe and secure.
If you wish to access our site please either upgrade your browser or download an alternative.
